KYD Electronic CO., Ltd

KYD Electronic CO., Ltd

EN / ES / TR
Haberler
Home > Haberler > Şirket Haberleri > Can anti-static gloves be cleaned by themselves?

Contact

KYD Electronic CO., Ltd

Whatsapp//Wechat: 86-13427954596
Facebook:
www.facebook.com/li.karen.184881

Email:
karen@kyd-esd.com
sales@kyd-esd.com
sales001@kyd-esd.com

Skype: karen.tyoled@outlook.com

Can anti-static gloves be cleaned by themselves?

Article source: KYD Electronic CO., Ltd / Author: KYD Electronic CO., Ltd / Publication time: 2022-08-25
First of all, let's understand what anti-static gloves are. Static-discharging gloves are made of anti-static polyester cloth and conductive fibers. They have good anti-static properties and elasticity, and are used in many aspects of life and work. Wearing anti-static gloves scientifically can help us eliminate the harm caused by static electricity, but the washing and maintenance of gloves is also a very important part, so as to prolong the life of anti-static gloves.

 
In fact, the conductive fiber itself is a fiber that is difficult to stain, but if the method used in washing is not very scientific, or if you use ordinary methods to clean, it will definitely not achieve the desired effect, and only use scientific special methods. Washing can keep the anti-static gloves clean and durable for a long time.

 

If you want to protect the quality of gloves and use them for a long time, KYD recommends the following scientific purification and cleaning methods:

 
1. The temperature of cleaning anti-static gloves must be well controlled. It is best to control the temperature of polyester fabrics to be greater than 60°C and less than or equal to 70°C, and the nylon fabrics to be controlled at greater than 50 degrees Celsius and less than or equal to 60 degrees Celsius.

2.The water used for cleaning anti-static gloves must pass through a special filter device, and the solvent used must be distilled before use.

3. For the anti-static gloves with oil stains before washing, the surface must be cleaned first, and the oil stains must be cleaned up before taking them to the clean room for washing. If any damage is found, it should be scrapped.

4. After cleaning the anti-static gloves, they must be dried under the clean air circulation system of the dust-free workshop, and all subsequent packaging work must be carried out under vacuum.