KYD Electronic CO., Ltd

KYD Electronic CO., Ltd

EN / ES / TR
Products
Home > Products > ESD Wearing > ESD wrist straps > ESD silicon wrist strap

Contact

KYD Electronic CO., Ltd

Whatsapp//Wechat: 86-13427954596
Facebook:
www.facebook.com/li.karen.184881

Email:
karen@kyd-esd.com
sales@kyd-esd.com
sales001@kyd-esd.com

Skype: karen.tyoled@outlook.com

ESD silicon wrist strap
  • ESD silicon wrist strap
  • ESD silicon wrist strap

ESD silicon wrist strap

New product hot selling silicon ESD wrist strap with 2.0m length PU coil cord wire. 

Whatsapp//Wechat:+86-134 2795 4596
Specification:

Model No.: KYD-EP1107

Coiled cord material: PU

Coiled cord specification: 2.0m length, 2.05mm diameter
Wrist band material: 100% Silicone
Button size: Φ4mm, Φ7mm, Φ10mm
Surface Resistance: 10E6~10E8 OHMS
Design: Adjustable and Rotating
Test methods: ESDA S1.1 EIA 625. MIL-STD-1686, and MIL-HDBK-263

Packing: 1pcs/bag, 20pcs/pack, 600pcs/CTN

 

Product parameters:

 

Static decay time: 0.1 (sec)

Conductive fiber spacing: 1 (mm)

Resistor: 1MΩ

Connector type: Alligator

Meets or exceeds requirements of ANSI ESD standard


Importance:

1. ESD wrist band is the basic, ordinary and necessary stuff on the product line.

2. It’s not only convenient in the operating process, but also the price is reasonable.

3. The principle is that the static of body could be released to the earth through earthing line and wrist band


Application:

Product line, CMOS chip, microprocessor, semiconductor, dish drivers, composites, LCD screen product, circuit product line, precision instrument, optics part


About ESD wrist straps:

It is an antistatic device used to safely ground a person working on very sensitive electronic equipment, to prevent the build up of static electricity on their body, which can result in electrostatic discharge. 


It is used in the electronics industry by workers working on electronic devices which can be damaged by ESD, and also sometimes by people working around explosives, to prevent electric sparks which could set off an explosion.


It consists of an elastic metal band, attached to a wire with a clip on the end to connect it to a ground conductor.


They are usually used in conjunction with an antistatic mat on the workbench, the wrist strap is usually worn on the non-dominant hand. It is connected to ground through a coiled retractable cable and 1 meg ohm resistor, which allows high-voltage charges to leak through but prevents a shock hazard when working with low-voltage parts. 


Leave a message, we'll back to you at the first time.

Recommended Products