KYD Electronic CO., Ltd

KYD Electronic CO., Ltd

EN / ES / TR
Home > Noticias > Noticias de la compañía > Maintenance methods of stainless steel products


KYD Electronic CO., Ltd

Whatsapp//Wechat: 86-13427954596



Maintenance methods of stainless steel products

Article source: KYD Electronic CO., Ltd / Author: KYD Electronic CO., Ltd / Publication time: 2023-05-05

Stainless steel tweezers manufacturers tell you: the maintenance methods of stainless steel products, the use of stainless steel with the development of the economy has become more widely, people in daily life is closely related to stainless steel, but many people do not know much about the performance of stainless steel, the maintenance of stainless steel is known to be a few.Many people think that stainless steel is never rust, in fact, stainless steel corrosion resistance is good, the reason is that the surface of the formation of a layer of purified film, in nature, it exists in the form of a more stable oxide. That is to say, although stainless steel according to the use of different conditions, the degree of oxidation is not the same, but eventually are oxidized, this phenomenon is usually called corrosion.

Exposed to the corrosion environment of the metal surface all electrochemical reaction or chemical reaction, uniform corrosion, stainless steel surface purification film in the corrosion resistance of the weak part, due to their own reaction and the formation of pitting reaction, the formation of small holes, coupled with aerobic ions close, the formation of a strong corrosive solution, accelerate the speed of corrosion reaction. There are stainless steel internal intergranular corrosion cracking, all these, on the surface of the stainless steel purification membrane are damaged.

Therefore, the stainless steel surface must be regularly cleaned and maintained in order to maintain its gorgeous surface and extend its service life. Cleaning stainless steel surface must pay attention to the surface scratch phenomenon, avoid the use of bleaching ingredients and abrasive detergent, steel wire ball. Grinding tools, etc., in order to remove the washing liquid, wash the surface with clean water at the end of washing.

Stainless steel surface dust and easy to get rid of dirt available soap detergent to wash, binder components, the use of alcohol or organic solvents (ether, benzene) scrub.

Stainless steel surface grease, oil lubricating oil pollution, clean with a soft cloth, with neutral detergent or ammonia solution or with special detergent washing. Stainless steel surface with bleach and a variety of acids attached, immediately rinse with water, and then with ammonia solution or neutral carbonic acid soda water immersion, with neutral detergent or warm water wash.

Stainless steel surface has rainbow pattern, is caused by excessive use of detergent or oil, washing with warm water neutral detergent can be washed away. Rust caused by dirt on the surface of stainless steel can be washed with 10% nitric acid or abrasive detergent, or can also be washed with special washing drugs. As long as we use the correct maintenance method, we can extend the service life of stainless steel, keep its clean, bright, gorgeous style.